Fife — May 2024
Worcester Bosch 30kW Combi
Generation
98% efficient
Replaced a 15-year-old non-condensing boiler in a semi-detached home. New A-rated combi with Nest smart controls fitted. Installation took 1 day.
Our work
A selection of recent boiler and renewable upgrades by our installer partners. All figures are illustrative — a survey gives exact figures for your property.
These case studies show the type of work our certified installer partners carry out across Scotland. Figures are illustrative and based on typical installations in each area. Your actual results depend on your property, energy usage, tariff and system.
Fife — May 2024
Generation
98% efficient
Replaced a 15-year-old non-condensing boiler in a semi-detached home. New A-rated combi with Nest smart controls fitted. Installation took 1 day.
Perthshire — March 2024
Generation
14,000 kWh/yr heat
Battery
Support applied
Air source heat pump replacing an oil boiler in a rural stone-built cottage. New larger radiators fitted throughout.
Glasgow West End — Feb 2024
Generation
2,800–3,240 kWh/yr
Battery
Tesla Powerwall 3
Combined solar and battery installation on a tenement flat. Roof assessed for structural capacity. DNO notification handled (G98, SP Energy Networks).
Aberdeen — Jan 2024
Generation
98% efficient
Boiler replacement in a granite-built detached house. Old back boiler removed and replaced with a modern combi. Flue repositioned through the roof.
Edinburgh — Nov 2023
Generation
22,000 kWh/yr heat
Battery
Support + support
Heat pump installation in a Victorian terrace. Insulation upgraded first to improve efficiency.
Dundee — Oct 2023
Generation
4,140–4,740 kWh/yr
Battery
Duracell Dura5 x2
Large solar array on a detached bungalow with dual battery storage. High self-consumption achieved. DNO notification handled (G99, SP Energy Networks).
Figures are illustrative. Actual generation varies per MCS MIS 3002 assessment. A survey gives exact figures for your property.
Reading the case studies
Case studies are useful for understanding what is possible, but they are not a prediction of what your installation will deliver.
Every home is different, and the figures shown here reflect the specific conditions of each property — its size, insulation levels, orientation, existing heating system, and the demands of the people living there. A 4kWp solar array on a south-facing tenement roof in Glasgow will produce a different amount of electricity from the same array on an east-west roof in Aberdeen, even though the equipment is identical. That is why we always stress that a survey is the only way to get exact figures for your home.
The case studies are most useful as a sense of what the process looks like — the type of system installed, how long it took, and what practical considerations arose on the day. The Aberdeen boiler replacement, for example, involved removing an old back boiler and repositioning the flue through the roof, which is a common challenge in granite-built properties. The Glasgow solar installation required a structural assessment of the tenement roof before work could begin. These are the kinds of details that a survey will surface for your property too.
If you see a case study that sounds similar to your home, it is a good indication that the same type of installation may be suitable for you. But the right system for your property depends on your own circumstances, which is why we always begin with a conversation and a no-obligation survey rather than a one-size-fits-all recommendation.
Case study questions
What homeowners ask us after reading through these examples.
These case studies show the type of work our certified installer partners carry out across Scotland. The system types, locations, and practical details are representative of real installations, but the figures are illustrative rather than tied to a specific named customer. We present them this way to give you an honest sense of what is involved without compromising homeowner privacy. A survey gives you exact figures for your own property.
Not necessarily. Generation and efficiency figures depend on your property, your energy usage, your tariff, and the specific system installed. A heat pump in a well-insulated Victorian terrace will perform differently from the same heat pump in a poorly insulated granite cottage. The case studies give you a realistic range of what is achievable, but the only way to know what your home will deliver is a no-obligation survey by a certified installer partner.
Possibly, but not guaranteed. The right system for your home depends on your current heating, your hot water demand, your insulation, your roof structure, and your budget — not just on what worked for a similar property. The survey is designed to answer exactly this question. We install through certified partners, and all heating work is carried out by our Gas Safe registered partner, so you can be confident the work meets the relevant standards.
Our installer partners work across mainland Scotland and the islands, so the range of locations in these case studies — Fife, Perthshire, Glasgow, Aberdeen, Edinburgh, and Dundee — reflects the spread of work we are involved with. If your area is not represented here, it does not mean we cannot help. Contact us with your postcode and we will confirm whether a certified installer partner is available near you.
The simplest way is to complete the 3-step quote form — it takes under 2 minutes. We will talk through your situation, and if an upgrade makes sense we will arrange a no-obligation survey by a certified installer partner. The survey gives you a fixed-price quote with exact figures for your property, including system size, expected generation or efficiency, and total cost. There is no pressure to proceed.
Get a no-obligation quote from an certified installer partner.